THe NeuroTrac ™ Tens is a dual channel digital TENS unit with 12 preset programs and 2 custom programs.
Warning: Last items in stock!
Three different treatment modes provides users with maximum flexibility and pain relief:
Conventional TENS or Normal ModeThis mode enables the user to select any rate between 2 Hz - 200 Hz and a pulse width between 50 µS - 300 µS. This is the most frequently used of the three modes. The most common selection is 80 Hz with a 200 µS pulse width.
This mode is comparable to the low rate TENS technique except that each low rate pulse is substituted for by a short BURST of 9 pulses (200 µS) at 150 Hz. It is a combination of conventional and low rate TENS. The burst mode is often referred to as acupuncture like TENS.
This mode is designed to help prevent nerve accommodation that some patient's experience. It is achieved by continuously cycling the pulse width and rate.
The NeuroTrac ™ Tens unit includes a carrying case, manual, lead wires, 9 volt battery, and a set of electrodes.
Amplitude: 0 - 80 mA
Frequency: 2 - 200 Hz
Pulse width: 50 - 300 ?S
Treatment time 1 minute - 12 hours
Waveform: asymmetrical, rectangular bi-phasic
|Weight||0.07KG without battery, 0.1KG with battery|
|Dual Channel||Individually isolated circuits|
|Amplitude||0 - 80 mA into 500 Ohm load|
|Waveform||Asymmetrical, rectangular bi-phasic with zero DC current|
|Mode||Continuous, Burst or Modulated|
|Burst mode||Bursts of 9 pulses [200 μS] at 150 Hz or 185 Hz, over 2 seconds|
|Modulation mode||6-second cycle of concurrent width modulation and pulse repetition rate|
|Environmental Conditions for use||+10 to +30 degrees Centigrade. 0-90% Humidity|
|Physical dimensions||119.2 x 69 x 28.7 mm|
|Environmental conditions for storage & transport||-10 to +50 degrees Centigrade. 0-90% Humidity|